Floplast 110mm Pipe

About FloPlast 110mm Pipes

The FloPlast 110mm Pipe is an industrial-grade uPVC system built to handle immense volumes of water. While commonly used as a soil and vent pipe (SVP), it also serves as the dedicated heavy-duty downpipe for FloPlast's massive 170mm Xtraflo commercial guttering system. Designed for warehouses, factories, large agricultural barns, and commercial apartment blocks, this 110mm pipe ensures rapid, blockage-free clearance of rainwater from vast roof surface areas. At Gutters.co.uk, we supply the complete range of FloPlast 110mm pipes, ring-seal fittings, bends, and brackets, providing a complete commercial drainage solution with fast UK delivery.

Why Choose FloPlast 110mm Pipe?

Extreme Flow Capacity: The massive 110mm diameter is engineered to channel a colossal volume of water quickly, preventing commercial guttering from overflowing during severe storms. Heavy-Duty Construction: Manufactured from highly robust, thick-walled uPVC that provides exceptional impact resistance in busy commercial, industrial, and agricultural environments. Highly Versatile: Can be used seamlessly as a high-capacity rainwater downpipe for the Xtraflo system or as a standard above-ground soil and vent system. Secure Ring-Seal Joints: Instead of basic push-fit, these pipes utilize a secure rubber ring-seal mechanism to ensure a completely watertight, leak-proof joint even under heavy water pressure. Minimal Maintenance: The smooth internal bore prevents the buildup of debris and moss, vastly reducing the risk of blockages and the need for high-level maintenance.

FloPlast 110mm Pipe FAQ

Which guttering system uses a 110mm downpipe? The 110mm pipe is specifically designed to be the downpipe drop for the heavy-duty FloPlast 170mm Xtraflo commercial guttering system. It is far too large to connect to standard residential guttering.

Is this the same pipe used for soil and vent systems? Yes! The Xtraflo guttering system was cleverly designed by FloPlast to utilize standard 110mm uPVC soil pipe components for its downpipes. This means you get the benefit of incredibly strong, widely available, and highly secure ring-seal fittings for your commercial rainwater drainage.

How do I join 110mm pipes and fittings together? FloPlast 110mm systems use a ring-seal socket. To join them, make sure the pipe end is chamfered (angled slightly), apply silicone lubricant to the rubber seal inside the socket, and push the pipe firmly into place.

How far apart should the pipe clips be spaced? Because of the sheer weight of a 110mm pipe when completely full of fast-flowing water, correct support is absolutely vital. Vertical pipe clips must be spaced at a strict maximum of 1.8 metres apart. We also strongly advise placing a support bracket directly underneath every socket joint.